Please be aware of possible changes in new regulations regarding Firearms and the ATF, check often, both the Official ATF gov and Iowa gov websites for any changes. Tech 2000 will be adapting all new regulation as directed. 02/12/2025
TECH 2000
1390 Redwood Ave. &
1394 Redwood Ave.
Riverside, Iowa 52327
319-936-2167 (Text Messaging Preferred)
Main Contact: Lee Pfeifer, Owner
Email: Lpfeifer_2000@yahoo.com
*Business Hours: Open as requested by customer appointments or gov. agencies.
Thank you for visiting our website. Please see below for an updated general information, list of our current vendors and information on Firearms Transfers and ATF Regulations. 02/12/2025.
Updates: Please use the links below to review some changes in the Firearms Industry. It is in your best interest to read and understand these changes. If you have questions relating to them, contact the US ATF directly.
1) On April 10th, 2024, theUS Attorney General signed ATF’s final rule, Definition of “Engaged in the Business” as a Dealer in Firearms, amending ATF’s regulations in title 27, Code of Federal Regulations (“CFR”), part 478.
https://www.atf.gov/firearms/final-rule-definition-engaged-business-dealer-firearms
2) The ATF has released the new version of Form 4473, Firearms Transfer Record and will be used starting February 1st, 2024. You can view the new form and related information at:
https://www.atf.gov/firearms/updated-atf-form-4473-firearms-transaction-record-august-2023-revisions
3) New Iowa rules on Firearms, please review this link: 01/01/2025
https://www.legis.iowa.gov/docs/publications/LGE/90/HF2556.pdf
----------------------
Some of the Services we offer, but not limited to: Please review all the way to the end of this website.
_______________
1) New Firearms Sales Only, because,
>We DO NOT buy used firearm(s) as there is NO way for us to verify if the item is stolen or not.
2) New Ammunition Sales (If Available)
>Limited Quantity, per Customer, per Day, per ATF rules.
3) Firearms Transfer(s)/Broker Sales;
>Iowa, resident to resident transfer(s),
>Transfer(s) of item(s) being shipped into Iowa from an FFL,
>Transfer(s) of item(s) being shipped to an FFL outside of Iowa,
>Estate Transfer(s) within Iowa.
4) New Firearms Accessories + Tasers + Non-Lethal
5) New Hunting and Camping Supplies
6) Test Firing and Sight/Scope Adjusting
>Handgun Sights (Front & Rear) Removal, Install, and Adjust
7) Warranty returns with RMA's
*8) On a limited quantity and conditions, Tech 2000 does offer, FREE, Form 4473, Firearms Transfer services, if you wish to legally gift and/or do an in-family only transfer of a personal firearm(s). Please contact us for more instructions on how this can be done.
Iowa Weapons Permit Training:
https://dps.iowa.gov/divisions/administrative-services/weapons-permit
Tech 2000 is associated with the Southeast Iowa Sport Shooting Center, Inc., an Iowa and US Federal Non-Profit, Public Education organization, established in 2013. This organization, under Iowa Code; Chapter 724.9(1b)(4b), Title XVI Criminal Law and Procedure; Subtitle 1: Crime And Criminal Acts; Chapter 724 Weapons, "utilizing NRA Instructors", can provide the Iowa required training to obtain the Iowa weapons permit(s). For more information, please contact Tech 2000.
Gunsmithing:
Before you determine if your item needs gunsmith work, as, on average, repairing an item could take several months to be completed, so, please read the following:
Determine if your item can be gunsmithed. There are two (2) types of gunsmithing work;
1) Replace damaged and/or replace original parts.
You can purchase, on your own, many part(s) for your item(s) by visiting the following website links;
Numrich Gun Parts Corporation
This site offer very detailed schematics, parts diagrams, and much more.
Bob's Gun Shop Inc.
This site offer very detailed schematics, parts diagrams, and much more.
https://jackfirstinc.com
www.ebay.com
After purchasing your part(s), search Youtube.com on how to install and /or fix it on your own. If you are uncomfortable, do not have the tools needed, do not have the mechanical skills and/or it deals with the overall function and SAFTY, them contact a gunsmith.
NOTE: Parts that the ATF requires an FFL transfer include, but not limited too, any part(s) that had an original manufacturer serial number stamped on it; like barrels, receives, frames, firing pins, and/or misc. action parts. Usually these types of parts are not available from the websites noted above.
2) Fabrication and/or addition or modification of part(s). This does NOT include doing anything that the ATF has stated to be illegal to do. Check the ATF.GOV for additional information as it does change often as new regulations are enacted.
Manufactures with Dealer Discounts:
Wholesalers with Dealer Discounts, for resale:
*To see available inventory, choose the "Hide out of Stock"
1) TECH 2000 Primary Supplier:
AKA: Zander's Sporting Goods
2) TECH 2000 Secondary Supplier:
3) Other:
Vendor Sites that have our FFL on File, but not limited to:
www.cheaperthandirt.com
www.guns.com
Auction Sites: *Please read the "Updates" section above before using these services.
*Please contact us for current pricing.
01/01/2025: TECH 2000: Terms and Conditions;
Iowa Gun Law HF756, aka, Iowa Constitutional Acquire and Carry Firearms. Please use the link below.
https://dps.iowa.gov/hf756-iowas-new-weapon-permit-law
Yes, you can use the above new regulation NOT to acquire an Iowa "Non-professional Carry Weapons Permit", but there is NO good reason, in our opinion, not to properly obtain and maintain your Iowa Permit.
We do not discriminate, the selling and/or transferring of item(s), but per US Federal Regulation's, an FFL provider has the "right to refuse" a transfer to any person they feel do not have the legal right to obtain such item(s), in which the item(s) will be returned to the sender and/or to the ATF.
TECH 2000 does not represent any political parties in any form and/or fashion. TECH 2000 sole business responsibility is to interpret and adhere, in good faith, all laws and codes set forth by our Governing Bodies.
Buyer:
1) Maximum of THREE item transfers per calendar day, per ATF Form 4473. Only (1) ONE Handgun/Revolver can be transferred per day, with a (5) FIVE business day (M-F) minimum wait before the next Handgun/Revolver transfer, per ATF Regulations. Fee(s) rate(s) are as follows per transfer day: First Item: $15.00, Second Item: $10.00, and Third Item: $5.00. Your total transfer fee(s) are subject to Iowa Sales Tax of 6% plus Washington County Local Option Tax of 1%, so 7% will be applied to your total due. We accept Cash or Local Check only and a hand written, carbon copy receipt will be provided. TECH 2000 does not collect Iowa sales tax on the item(s) purchased outside TECH 2000, only on the transfer fee(s).
2) Original issued, State/Military ID and Iowa State Permit (If required) need to be provided on the day of item(s) pickup. ID MUST show "CURRENT" (Living) address with a picture of you on it. Background (NICS) check "may" be conducted, even with a valid Iowa state permit. A photocopy of the above(s) will be made as required by the ATF, and will be included with the ATF 4473 paperwork.
An FFL owner, is State and Federally liable to secure and protect all personal information required for the completion of the ATF Form 4473. This means that an FFL owner can be "criminally charged" for any misuse of your personal information, but you should be comfortable before releasing this information, if not, ask the FFL to transfer your item(s) to a different FFL.
Iowa permits "may" be checked using the Iowa Department of Public Safety, following website:
https://leapps.dps.state.ia.us/apps/r/dps/public-app/home?session=2904512311902
3) Buyer needs to provide tracking and/or shipping information via text messaging or email provided above before item(s) pickup.
** Please text message when you are 10 minutes out from our location for item(s) pickup.
If buyer is unable to acquire or does not pickup item(s) within 30 days of delivery, they will either be sent back to the shipper (at buyers cost) or forfeited to the ATF.
4) Seller and/or Shipper must include a copy of the Transfer’s current FFL and customer purchase receipt in the packaging of the item. If shipment requires signature for delivery, please provide the shipping company and/or tracking number upon release to the shipping company. All shipments must comply with all US Federal shipping Laws. TECH 2000 will provide a copy of our current FFL to the Transfer’s FFL upon email and/or text message request. Package(s) received will be opened to retrieve transfer paperwork. The item(s) packaging will NOT be opened until the buyer arrives for pickup or requests prior opening/inspection before pickup. Any damages to shipping packaging will be documented and reported to both the buyer and shipper upon delivery. All Transfer's FFL will be checked using the ATF FFLeZCheck online service to verify that the sender FFL is a valid ATF FFL. If the check returns invalid, the item(s) will be turned over to the local Sheriff Department for investigation.
Please review the following link relating to using the United States Postal Service for shipping of firearms and ammunition.
https://www.uspis.gov/news/scam-article/prohibited-restricted-and-non-mailable-items#:~:text=Under%20federal%20law%2C%20it%20is,you%20send%20them%20through%20USPS.
TECH 2000: is NOT, in any form or way, liable for ANY contracts, agreements, payments, credits, debts, collections, taxes, illegal, liens, descriptions, conditions, parts, shipping, missing/lost, and/or warranties of any property and/or services NOT directly provided by TECH 2000. All customer transactional information is confidential and will only be released if required per US Federal and/or Iowa State Code. TECH 2000 reserves the right not to received and/or transfer item(s), in which case, they will be returned to the shipper or forfeited to the ATF. These terms and conditions may change without notice and are NOT all inclusive.
Gunsmith Services: TECH 2000 does provide Full Gunsmith services under its FFL dealer license. If a per-purchase or purchased item(s) needs gunsmith work before or after transferring it over to the buyer, please email or text message the services needed so we can provide the buyer with a work order quote.
Returns: TECH 2000 does not charge any labor fees for item(s) needing to be return back to the shipper. We will work both with the buyer and shipper to resolve any issues. The buyer is responsible for all costs relating to the return of an item(s).
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide while visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
*This website is for informational purposes only and is not an eCommerce website. End...